








PLP428b
The PLP428b is a four-input, eight-output Digital Signal Processor (DSP) intended for use in standalone processors or system amplifiers for professional audio or high-end home audio.
- Description
- Specifications
- Downloads
The PLP428b is a four input, eight output Digital Signal Processor (DSP) intended for use in standalone loudspeaker processor units
and system amplifiers for professional audio or high end home cinema. Available in four performance levels and using only the best
sounding components available, its unrivalled audio quality and feature set match the highest standards.
All connections on PLP428b are internal multi-pin connectors. To build a full product, additional PCBs are needed with external connectors. See “Accessories” for details.
KEY FEATURES
• 4 inputs, 8 outputs
• dual-channel AES/EBU input
• 96kHz sample rate
• Unparalleled audio quality
• State-of-the-art digital processing
• Programmable User Interface
• Monitoring and permanent logging of key parameters such as temperature, signal level and gain reduction
• 384 FIR taps per output
• 100 presets
• Optional Dante and AES67 module available
• Prepared for AVB / MILAN (coming soon)
• Multiple display and GPI / GPO support
• Optional Tilt Sensor
• 8 DC inputs for potentiometers
• 8 current measurement AC inputs (optional)
• 8 temperature sensor inputs
• 100Mbit LAN with loop through
• Direct Drive capability for single ended XLR outputs, or balanced drive with a suitable output driver card
Please also see AN812: Common Features MK2 as well as the Application Notes on our website www.alldsp.com for additional information. To see all application notes and detailed technical information, please request a login by sending an email to [email protected]. Some of the listed features are optional. Please contact us for detailed information.
All connections on PLP428b are internal multi-pin connectors. To build a full product, additional PCBs are needed with external connectors. See “Accessories” for details.
KEY FEATURES
• 4 inputs, 8 outputs
• dual-channel AES/EBU input
• 96kHz sample rate
• Unparalleled audio quality
• State-of-the-art digital processing
• Programmable User Interface
• Monitoring and permanent logging of key parameters such as temperature, signal level and gain reduction
• 384 FIR taps per output
• 100 presets
• Optional Dante and AES67 module available
• Prepared for AVB / MILAN (coming soon)
• Multiple display and GPI / GPO support
• Optional Tilt Sensor
• 8 DC inputs for potentiometers
• 8 current measurement AC inputs (optional)
• 8 temperature sensor inputs
• 100Mbit LAN with loop through
• Direct Drive capability for single ended XLR outputs, or balanced drive with a suitable output driver card
Please also see AN812: Common Features MK2 as well as the Application Notes on our website www.alldsp.com for additional information. To see all application notes and detailed technical information, please request a login by sending an email to [email protected]. Some of the listed features are optional. Please contact us for detailed information.
Parameter | Value | Unit |
---|---|---|
Analog Inputs (electronically balanced) | 4 | |
Dynamic Range | 126 | dB(A) |
Input Impedance (balanced) | 21 | kΩ |
Input Impedance (single ended) | 10.5 | kΩ |
Delay | 2000 | ms |
Digital Inputs | 2 | |
Analog Outputs | 8 | |
Dynamic Range | 116 | dB(A) |
Maximum Output Level | 12 | dBu |
Output Level Selection | - | dBu |
Noise Floor | -104 | dBu(A) |
Source Impedance | 235 | Ω |
Delay | 50 | ms |
Input-to-output latency | 528 | µs |
Gain (without amplifier, DSP only) | 0 +/- 0.5 | dB |
Dynamic Range (unity gain, DSP only) | > 116 | dB(A) |
THD | 0.003 | % |
Frequency Response (DSP only) | 20…20k | Hz |
Frequency Response (DSP only) | 10…40k | Hz |
DSP | 64 bit multimode ALLDSP AM685 | |
Number of processors | 3 | |
Sample rate | 96 | kHz |
FIR | 8 x 384 | taps |
Presets | 100 | |
PEQ (per channel) | 10 | bands |
Grouping EQ (each input) | 5 | bands |
Compressors (per channel) | 4 | bands |
Limiter (switchable true RMS / Zero Attack, each in and out) | 1 | bands |
Analog Supply Voltage VCC / VSS | +/- 15 | V |
Optional additional supply voltage (VDD) | 6 | V |
All values, specifications, features, and other statements are for information purposes only and do not constitute a guarantee. Specifications are measured in real-life environments. Due to manufacturing differences, deviations can occur. All information may be changed by ALLDSP without notice.
Please log in to access downloads.