1800i Eco
The 1800iE is a two-input, four-output Digital Signal Processor (DSP) intended for use in active loudspeakers for professional audio or high-end home audio.
- Description
- Specifications
- Downloads
The 1800i Eco is a two input, four output Digital Signal Processor (DSP) intended for use in active loudspeakers for professional audio
or high end home audio. Available in four performance levels and using only the best sounding components available, its unrivalled
audio quality and feature set match the highest standards.
All connections on 1800i Eco are internal multi-pin connectors. To build a full product, additional PCBs are needed with external connectors. See “Accessories” for details.
KEY FEATURES
• 2 or 4 inputs (selectable), 4 outputs
• 96kHz sample rate (48kHz in 4-input mode)
• Unparalleled audio quality
• State-of-the-art digital processing
• Programmable User Interface
• Monitoring and permanent logging of key parameters such as temperature, signal level and gain reduction
• 384 FIR taps per output
• 100 presets
• Optional Dante and AES67 module available
• Prepared for AVB / MILAN (coming soon)
• Multiple display and GPI / GPO support
• 2 DC inputs for potentiometers
• 2 temperature sensor inputs
• 100Mbit LAN
• Plug-and-Play compatibility with Pascal, Powersoft, ICEpower and Hypex amplifier modules
Please also see AN812: Common Features MK2 as well as the Application Notes on our website www.alldsp.com for additional information. To see all application notes and detailed technical information, please request a login by sending an email to [email protected]. Some of the listed features are optional. Please contact us for detailed information.
All connections on 1800i Eco are internal multi-pin connectors. To build a full product, additional PCBs are needed with external connectors. See “Accessories” for details.
KEY FEATURES
• 2 or 4 inputs (selectable), 4 outputs
• 96kHz sample rate (48kHz in 4-input mode)
• Unparalleled audio quality
• State-of-the-art digital processing
• Programmable User Interface
• Monitoring and permanent logging of key parameters such as temperature, signal level and gain reduction
• 384 FIR taps per output
• 100 presets
• Optional Dante and AES67 module available
• Prepared for AVB / MILAN (coming soon)
• Multiple display and GPI / GPO support
• 2 DC inputs for potentiometers
• 2 temperature sensor inputs
• 100Mbit LAN
• Plug-and-Play compatibility with Pascal, Powersoft, ICEpower and Hypex amplifier modules
Please also see AN812: Common Features MK2 as well as the Application Notes on our website www.alldsp.com for additional information. To see all application notes and detailed technical information, please request a login by sending an email to [email protected]. Some of the listed features are optional. Please contact us for detailed information.
| Parameter | Value | Unit |
|---|---|---|
| Analog Inputs (electronically balanced) | 2 (4) | |
| Dynamic Range | 126 | dB(A) |
| Dynamic Range | 110 | |
| Input Impedance (balanced) | 21 | kΩ |
| Input Impedance (single ended) | 10.5 | kΩ |
| Delay | 2000 | ms |
| Analog Outputs | 4 | |
| Dynamic Range | 112 | dB(A) |
| Maximum Output Level | 12 | dBu |
| Output Level Selection | 12 | dBu |
| Noise Floor | -100 | dBu(A) |
| Source Impedance | 235 | Ω |
| Delay | 2000 | ms |
| Input-to-output latency | 1000 | µs |
| Gain (without amplifier, DSP only) | 0 +/- 0.5 | dB |
| Dynamic Range (unity gain, DSP only) | 112 | dB(A) |
| Dynamic Range (with typical amplifier) | 112 | dB(A) |
| THD | 0.005 | % |
| Frequency Response (DSP only) | 20…20k | Hz |
| Frequency Response (DSP only) | 10…20k | Hz |
| DSP | 64 bit multimode ALLDSP AM685 | |
| Number of processors | 1 | |
| Sample rate | 48 | kHz |
| FIR | 4 x 144 | taps |
| Presets | 100 | |
| PEQ (per channel) | 10 | bands |
| Grouping EQ (each input) | 5 | bands |
| Compressors (per channel) | 4 | bands |
| Limiter (switchable true RMS / Zero Attack, each in and out) | 1 | bands |
| Analog Supply Voltage VCC / VSS | +/- 15 | V |
| Optional additional supply voltage (VDD) | 6 | V |
All values, specifications, features, and other statements are for information purposes only and do not constitute a guarantee. Specifications are measured in real-life environments. Due to manufacturing differences, deviations can occur. All information may be changed by ALLDSP without notice.
Please log in to access downloads.
